We are your competent partner for efficiency measures in the building sector: We are happy to advise you and offer you a large portfolio of optimal solutions - customised for every building project.
Get an overview of our range of services or jump directly to the service your are searching for:
If you would like to learn more about our services, please send us an e-mail or contact us at (+49) 6151 82699-0.
We are happy to support you with your new build or retrofit project:
Building physics: project support for all building types in all project phases
Energy balancing calculations using the PHPP tool
2D and 3D thermal bridge calculations
Creation of climate datasets and input data sheets for the PHPP (see also "components - project support")
Support via phone in the event of urgent questions / problems
On-site visits to the construction site for quality inspection
Blower Door tests ranging from tests for simple homes to complex non-residential buildings requiring multiple fans (see also "airtightness test")
Measurement of indoor conditions (ranging from a measurement of the indoor temperature and humidity level to the complex measurement of radiation asymmetry and turbulence)
Building certification (see also "buildings")
Commissioning support, success monitoring, and performance optimisation (see also "measurements")
If you are interested in our services in the area of project support and quality assurance, please do not hesitate to send us an email or get in touch at (+49) 6151 82699-0.
Advice on energy-efficient retrofits, including the creation of a step-by-step retrofit plan (also possible with interior insulation)
Feasibility studies (e.g., Is it possible to install a ventilation system in the building project? Does it make sense to use interior insulation in the specific case at hand?)
Dynamic simulations (e.g., on cooling, dehumidification and summer comfort; see also "simulations")
Advice on supply options (e.g., cogeneration plants, heat pumps, local/district heating)
Advice on the selection of adequate building components and creation of PHPP input data sheets to facilitate the building certification process (see also "project support")
Advice on simple and cost-effective solutions for the building services
Lifecycle assessments based on the MEET Tool developed by the Passive House Institute with the aim of optimising the energy efficiency and greenhouse gas emissions over the whole life cycle
Economic viability analyses
Advice on special-use buildings (e.g., swimming pools, museums, clinics, monuments, high-rise buildings)
Analyses for the district level
In-house training tailored to your needs
Networking opportunities & knowledge exchange
If you are interested in our services in the area of project support and quality assurance, please do not hesitate to send us an email or get in touch at (+49) 6151 82699-0.
Complex building projects often require a more detailed thermal analysis. This may be the case, for instance, for buildings with large glass surfaces, a special wall construction, strict requirements for indoor conditions, very much or very little storage capacity or a heat load characterised by strong temporary fluctuations.
Dynbil, the tool for dynamic building simulation, provides an analysis with the necessary level of detail. Based on an algorithm that is very close to the underlying physical principles, it offers a high time resolution and can display temperatures that vary over time and space.
Dynbil analyses variables, such as solar gains, heat retention, and ventilation, with a time resolution of one hour and less. Apart from providing thermal building simulations and predicting temperatures as well as heating and cooling loads, the tool can also calculate humidity and moisture storage in building components.
Service: Hygrothermal dynamic building simulation
Contact: Email
The Passive House Institute offers various measurements that can be performed before, during or after the construction/retrofitting phase. The measurements are either carried out as part of a research project or booked as a separate service.
Whether it is a school, office building, detached house, apartment block, swimming pool, museum or hotel... - we have the necessary expertise for all building types and types of use.
Please feel free to get in touch so that we can find the best solution for you.
Airtightness tests (also known as "blower door tests") are useful and recommended for assessing the level of airtightness of a building. Hence, the test plays an important role in the certification of Passive Houses and EnerPHit retrofits.
The measurement helps identify and close remaining air leakeages in the building envelope, thereby, assessing the quality of the installed building components. As the ventilation system requires a certain level of airtightness, it also improves the functionality of the ventilation system.
During the measurement, a fan is installed airtight in a door or window. Leaks are then detected in the building at a negative pressure of 50 pascals. The leaks can be localised by hand, with a flow meter or, in inaccessible places, with a thermographic camera.
This increases the care taken by the companies involved in the building envelope and prevents future structural damage, draughts and cold air pockets.
Service: Airtightness test including detailed documentation of leakages and, if necessary, creation of thermographs under negative pressure conditions
Contact: Email
Building monitoring can be helpful in proving that the energy requirement calculated on the basis of long-term climate data for the location and normal usage conditions is also achieved in practice. For this purpose, the most important boundary conditions are measured, in particular the weather and the indoor temperature. If more parameters are recorded, an increasingly detailed picture of the building's performance can be created.
Two annual periods are usually covered, with the first year providing assistance with commissioning and operational optimisation and the second year being used for quantitative analysis.
From minimal monitoring for plausibility checks to our standard procedure and detailed monitoring to clarify research questions on the building envelope, ventilation systems and supply technology, we have acquired a wealth of experience since 1996.
Service: Monitoring in the desired scope and detail
Contact: Email
Infrared thermography visualises the heat radiation (infrared light) of an object. It can be used to determine and visualise the surface temperature of a building component. This provides us with information about heat losses and enables us to qualitatively analyse the implementation of thermal insulation measures, thermal bridges and warm air flows. Quantitative statements such as the exact thermal insulation standard of a building component, on the other hand, are difficult to assess using thermography. The correct creation and evaluation of infrared images requires expertise and specialised knowledge. When analysed carefully, thermography is a valuable tool for assessing the thermal envelope of a building.
Service: Infrared thermography for quality assurance
Contact: Email
Materials and devices can be tested in a climatic chamber with two climatic zones. The chamber creates precise, controlled conditions (e.g. for temperature and humidity), which makes it possible to examine the reliability, performance and wear of the material or device under realistic conditions.
Service: Testing of materials or devices in a climatic chamber
Contact: Email
The Passive House Institute is your knowledgeable partner for all new builds and retrofit projects, ranging from small single-family homes to multi-storey apartment buildings, office towers and schools to more complex non-residential projects like museums, pools or hospitals.
Here is an exemplary selection of projects we have been involved in:
Multi-storey apartment building in New York City
Retrofit of a historic building
Our services: EnerPHit Classic certification
Multi-storey apartment building in Cologne
Retrofit
Our services: Passive House Plus certification
Single-family home in Darmstadt (Arheilgen)
Retrofit
Our services: EnerPHit certification
Single-family home in Darmstadt (Martinsviertel)
Retrofit
Our services: blower door test
Residential home "Antoniushaus" in Hochheim am Main
New build
Our services: blower door test
University of Oxford: The Stephen A. Schwarzman Centre for the Humanities
New build
Our services: Passive House Classic certification
Astrid Lindgren school in Weiterstadt
Retrofit of the "Swedish block"
Our services: project support + summer simulation + EnerPHit certification
Astrid Lindgren school in Weiterstadt
New build
Our services: project support + summer simulation + Passive House Plus certification
Primary school in Raunheim
New build
Our services: project support + Passive House Classic certification
Bertolt Brecht school in Darmstadt
New build
Our services: Passive House Plus certification
Campus of the Chamber of Crafts in Trier
New build
Our services: Passive House Classic certification + performance optimisation + monitoring
Christoph Graupner school in Darmstadt
Retrofit and building extension
Our services: blower door test, energy balancing according to the German norm 18599
Elisabeth Selbert school in Babenhausen
EnerPHit retrofit, house in a house retrofit
Our services: project support
Gym of the Johann Hinrich Wichern school in Saarlouis
New build
Our services: project support
Town hall in Baesweiler
Retrofit and building extension
Our services: EnerPHit- and Passive House Classic certification
Hessian Ministry of Finance
New build
Our services: project support + Passive House Classic certification + commissioning support
Department of parks and recreation in Frankfurt am Main
New build
Our services: Passive House Classic certification
Offices of the "Institut Wohnen und Umwelt" in Darmstadt
Retrofit
Our services: EnerPHit certification
St Sidwell's Point Leasure Centre in Exeter (in-door pool, gym, wellness centre)
New build
Our services: Passive House Classic certification
Art repository in Darmstadt
New build
Our services: Passive House Plus certification
Hospital in Frankfurt am Main
New build
Our services: project support + summer simulation + Passive House certification + monitoring
Swimming pool "Bambados" in Bamberg
New build
Our services: Passive House Classic certification + monitoring
Church in Heinsberg
Retrofit
Our services: EnerPHit certification
As an internationally leading, practice-oriented research centre, the Passive House Institute has been and continues to be involved in many pilot projects. More information on these projects can be found under "Research".